RAM Cradle for all 10 inch iPads with Heavy Duty Cases

RAM Mounts
    • List Price:  
    • Item #8973
    • PN: RAM-HOL-TAB8U
  • In Stock
  • List Price:  
  • Item #8973
Qty

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet.

The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases:

  • 10" Screen Tablets with or without heavy duty cases (including all 10" iPads)
  • 10" Screen Tablets with OtterBox Defender cases (including all 10" iPads)
  • 10" Screen Tablets with Gumdrop Drop Tech cases (including all 10" iPads)
  • 10" Screen Tablets with Griffin Technology cases (including all 10" iPads)
  • 10" Screen Tablets with Belkin cases (including all 10" iPads)
  • Many More!

The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Maximum Width = 8.12"
Length Range = 8.5" to 10.5"
Maximum Depth = 1.12"

Features:

  • Support cups contain open slots to accommodate for tablets of varying dimensions
  • Spring loaded for ease of removal and insertion of your tablet
  • Full access to all ports 
  • Customize height of holder for your tablet
  • Best usage in low vibration environments

Material: High Strength Composite

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

This is the cradle only. The RAM Diamond Base with 1" ball, required to attach the cradle to RAM mounting systems, is not included with purchase. You will also need either a Short, Standard, or Long Arm plus a Claw Mount, Suction Cup, Yoke Mount, or Glareshield Base.

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will Match that price and beat it by 10% of the difference. See Details.

Buy with Confidence!

Purchase today and you can return it in the original condition through Wednesday, March 19, 2025!   See our return policy.

RAM Cradle for all 10 inch iPads with Heavy Duty Cases

  • In Stock
  • List Price:  
  • Item #8973
  • PN: RAM-HOL-TAB8U
Qty

RAM Cradle for all 10 inch iPads with Heavy Duty Cases Overview:

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet.

The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases:

  • 10" Screen Tablets with or without heavy duty cases (including all 10" iPads)
  • 10" Screen Tablets with OtterBox Defender cases (including all 10" iPads)
  • 10" Screen Tablets with Gumdrop Drop Tech cases (including all 10" iPads)
  • 10" Screen Tablets with Griffin Technology cases (including all 10" iPads)
  • 10" Screen Tablets with Belkin cases (including all 10" iPads)
  • Many More!

The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Maximum Width = 8.12"
Length Range = 8.5" to 10.5"
Maximum Depth = 1.12"

Features:

  • Support cups contain open slots to accommodate for tablets of varying dimensions
  • Spring loaded for ease of removal and insertion of your tablet
  • Full access to all ports 
  • Customize height of holder for your tablet
  • Best usage in low vibration environments

Material: High Strength Composite

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

This is the cradle only. The RAM Diamond Base with 1" ball, required to attach the cradle to RAM mounting systems, is not included with purchase. You will also need either a Short, Standard, or Long Arm plus a Claw Mount, Suction Cup, Yoke Mount, or Glareshield Base.

 

2 CUSTOMER REVIEWS

  • RAM Cradle for all 10 inch iPads with Heavy Duty Cases

    2 Reviews

  • Average Customer Review:

Filter

Select a row below to filter reviews by star rating.

Top Reviews
  • Verified Purchase

well built .. easy to use

  • By TERRY 182 owner from Lewisburg TN USA on Sunday, February 11, 2024
  • Pros:
  • Review: Would definitely recommend

  • Verified Purchase

  • By Robert from Berwyn, PA on Sunday, April 12, 2015
  • Pros:
  • Review: I fly a 1978 Piper Archer II and purchased this RAM Cradle for 10-inch iPads with Heavy Duty Cases along with th eRAM yoke Mount Clamp Base, the RAM Standard Double Socket Arm, and the RAM Diamond Base with 1" Ball so I could mount my iPad2 on my pilot yoke. I am very happy with the result. It is far superior to using the iPad in my lap as I have done for the past 2 years. I with the iPad in place in landscape mode, I have absolutely no restriction to viewing the standard 6-pack instruments and just slight head movements needed to view the engine and fuel instruments. The feel of the yoke is slightly heavier than I was used to with my pilot-yoke-mounted Garmin 396, but still well balanced with no restrictions to motion at all. It is easy to switch to portrait mode which I think might be superior for viewing approach plates while flying instrument approaches. Overall, I find this yoke mounted solution well built, study, and solid with no tendency to loosen during flight. If you are considering a yoke mounted iPad solution for your Archer II, I think you will find the above equipment very satisfactory. Note that if you have a case that is thicker than about 5/8" as I do, you need to be sure to go with this RAM-HOL-TAB8U. The other choices cannot handle a thick case.

  • Verified Purchase

well built .. easy to use

  • By TERRY 182 owner from Lewisburg TN USA on Sunday, February 11, 2024
  • Review: Would definitely recommend
  • Was this review helpful to you? Yes No 0 Other people found this review helpful.
  • Verified Purchase

  • By Robert from Berwyn, PA on Sunday, April 12, 2015
  • Review: I fly a 1978 Piper Archer II and purchased this RAM Cradle for 10-inch iPads with Heavy Duty Cases along with th eRAM yoke Mount Clamp Base, the RAM Standard Double Socket Arm, and the RAM Diamond Base with 1" Ball so I could mount my iPad2 on my pilot yoke. I am very happy with the result. It is far superior to using the iPad in my lap as I have done for the past 2 years. I with the iPad in place in landscape mode, I have absolutely no restriction to viewing the standard 6-pack instruments and just slight head movements needed to view the engine and fuel instruments. The feel of the yoke is slightly heavier than I was used to with my pilot-yoke-mounted Garmin 396, but still well balanced with no restrictions to motion at all. It is easy to switch to portrait mode which I think might be superior for viewing approach plates while flying instrument approaches. Overall, I find this yoke mounted solution well built, study, and solid with no tendency to loosen during flight. If you are considering a yoke mounted iPad solution for your Archer II, I think you will find the above equipment very satisfactory. Note that if you have a case that is thicker than about 5/8" as I do, you need to be sure to go with this RAM-HOL-TAB8U. The other choices cannot handle a thick case.
  • Was this review helpful to you? Yes No 15 Other people found this review helpful.

3 QUESTIONS & ANSWERS

  • Previously Asked Questions

  • Wednesday, September 25, 2024

    Q: Will this work with a iPad case

    A: Yes, he RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases:
    -10" Screen Tablets with or without heavy duty cases (including all 10" iPads) -10" Screen Tablets with OtterBox Defender cases (including all 10" iPads) -10" Screen Tablets with Gumdrop Drop Tech cases (including all 10" iPads) -10" Screen Tablets with Griffin Technology cases (including all 10" iPads) -10" Screen Tablets with Belkin cases (including all 10" iPads) & Many More!

  • Sunday, February 13, 2022

    Q: I have a. iPad 7th generation, 2019, is this holder compatible please??

    A: That iPad shows that it would need the RAM Tab-Tite Cradle for the Apple iPad Air 1-2 & 9.7" Tablets WITH CASE instead.

  • Sunday, September 03, 2017

    Q: Will your max mount also serve as a windshield mount for the Samsung tab e tablet?

    A: Sure!  If you add the Suction Cup mount you could use it on the windshield.

    This will fit any tablet that will fit in the dimensions below.
    Height: 9" to 11.5"
    Width: 6.38" to 8.31"
    Depth: 0.13" to 1.12"

Customers who bought this also considered:

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will match that price and beat it by 10% of the difference.

Buy with Confidence!

Purchase today and you can return it in the original condition through Wednesday, March 19, 2025 !   See our return policy.

Sign up for our newsletter and stay updated on special offers.