RAM Glareshield Clamp Mount Base

RAM Mounts
    • List Price: 
    • Item #8962
  • In Stock
  • List Price: 
  • Item #8962
Qty

The RAM Glare Shield Clamp Base is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.

Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"

Material: Powder Coated Marine Grade Aluminum

Ball Size: 1" Rubber Ball "B" Size

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will Match that price and beat it by 10% of the difference. See Details.

Buy with Confidence!

Purchase today and you can return it in the original condition through Sunday, June 13, 2021 ! See our return policy.

RAM Glareshield Clamp Mount Base

  • In Stock
  • List Price: 
  • Item #8962
Qty

RAM Glareshield Clamp Mount Base Overview:

The RAM Glare Shield Clamp Base is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.

Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"

Material: Powder Coated Marine Grade Aluminum

Ball Size: 1" Rubber Ball "B" Size

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

 

3 CUSTOMER REVIEWS

  • RAM Glareshield Clamp Mount Base

    3 Reviews

  • Average Customer Review:

Filter

Select a row below to filter reviews by star rating.

Top Reviews
  • Verified Purchase

Not for a 182Q

  • By ECMO4 from New Valley of the Sun on Thursday, February 11, 2021
  • Pros: Will probably work somewhere
  • Review: Purchased for a 182Q. Clamp just fits over the glareshield without the rubber nubs on the screws. Placed a small metal strip to keep the screws from digging into the glareshield. Only holds if you have the ball and screws on the underside, if they are on the top side any weight at all pulls the whole clamp off. Put another small piece of metal on the bottom to extend the clamp out but doesn't hold much better. As someone else said......good idea, but not for this application.

    Also, the ball and screws on the same side REALLY limit the movement. I didn't think it would be that big of deal but I was wrong.

  • Verified Purchase

  • By Gerald from Salisbury NC USA on Thursday, September 24, 2020
  • Pros:
  • Review: Totally useless in my aircraft.  The concept is good, but it just doesn’t work for me. I have not returned it because I keep hoping  I’ll find some use for it

  • Verified Purchase

Not secure on DA40 panel glareshield

  • By A Customer from Burr Ridge IL USA on Sunday, June 23, 2013
  • Pros:
  • Review: The clamp was not secure (glareshield too thin). Longer screws could probably create enough clamping pressure but the glareshield itself is too thin and flexible to support an i-pad mounted with this clamp. Tried to return the clamp but return was rejected due to an alleged "scratch" on the clamp.

Not for a 182Q

  • By ECMO4 from New Valley of the Sun on Thursday, February 11, 2021
  • Pros: Will probably work somewhere
  • Cons: Screws/ball on same side; movement limited. Clamp "arm" short, easily works off
  • Review: Purchased for a 182Q. Clamp just fits over the glareshield without the rubber nubs on the screws. Placed a small metal strip to keep the screws from digging into the glareshield. Only holds if you have the ball and screws on the underside, if they are on the top side any weight at all pulls the whole clamp off. Put another small piece of metal on the bottom to extend the clamp out but doesn't hold much better. As someone else said......good idea, but not for this application.

    Also, the ball and screws on the same side REALLY limit the movement. I didn't think it would be that big of deal but I was wrong.
  • Was this review helpful to you? Yes No 0 Other people found this review helpful.
  • Verified Purchase

  • By Gerald from Salisbury NC USA on Thursday, September 24, 2020
  • Review: Totally useless in my aircraft.  The concept is good, but it just doesn’t work for me. I have not returned it because I keep hoping  I’ll find some use for it
  • Was this review helpful to you? Yes No 0 Other people found this review helpful.
  • Verified Purchase

Not secure on DA40 panel glareshield

  • By A Customer from Burr Ridge IL USA on Sunday, June 23, 2013
  • Review: The clamp was not secure (glareshield too thin). Longer screws could probably create enough clamping pressure but the glareshield itself is too thin and flexible to support an i-pad mounted with this clamp. Tried to return the clamp but return was rejected due to an alleged "scratch" on the clamp.
  • Was this review helpful to you? Yes No 20 Other people found this review helpful.

0 QUESTIONS & ANSWERS

Customers who bought this also considered:

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will match that price and beat it by 10% of the difference.

Buy with Confidence!

Purchase today and you can return it in the original condition through Sunday, June 13, 2021 !  See our return policy.

Sign up for our newsletter and stay updated on special offers.