RAM EZ-Roll'r Cradle for Apple iPad Mini 6

RAM Mounts
    • Item #14526
    • Manufacturer Part #:
  • In Stock
  • Item #14526
Qty

The RAM EZ-Roll’r cradle for the Apple iPad mini 6 is the most cost effective and simple way to secure the iPad mini 6 in a variety of applications. The RAM-HOL-AP36U cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll'r cradle also features two attachment points on the back to attach a RAM round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Compatible with the Apple iPad Mini 6.  RAM-HOL-AP36U. 

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

The RAM Diamond Base with 1" ball, required to attach the cradle to RAM mounting systems, is not included with purchase. You will also need either a Short, Standard, or Long Arm plus a Claw Mount, Suction Cup, Yoke Mount, or Glareshield Base.

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will Match that price and beat it by 10% of the difference. See Details.

Buy with Confidence!

Purchase today and you can return it in the original condition through Wednesday, January 04, 2023 ! See our return policy.

RAM EZ-Roll'r Cradle for Apple iPad Mini 6

  • In Stock
  • Item #14526
  • PN:RAM-HOL-AP36U
Qty

RAM EZ-Roll'r Cradle for Apple iPad Mini 6 Overview:

The RAM EZ-Roll’r cradle for the Apple iPad mini 6 is the most cost effective and simple way to secure the iPad mini 6 in a variety of applications. The RAM-HOL-AP36U cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll'r cradle also features two attachment points on the back to attach a RAM round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Compatible with the Apple iPad Mini 6.  RAM-HOL-AP36U. 

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

The RAM Diamond Base with 1" ball, required to attach the cradle to RAM mounting systems, is not included with purchase. You will also need either a Short, Standard, or Long Arm plus a Claw Mount, Suction Cup, Yoke Mount, or Glareshield Base.

 

4 CUSTOMER REVIEWS

  • RAM EZ-Roll'r Cradle for Apple iPad Mini 6

    4 Reviews

  • Average Customer Review:

Filter

Select a row below to filter reviews by star rating.

Top Reviews
  • Verified Purchase

Easy to get iPad in and out

  • By A Customer from Lyons GA USA on Tuesday, May 24, 2022
  • Pros: Sturdy. Fits perfectly but iPad can not have a case on it.
  • Review:

  • Verified Purchase

It Fills the Bill

  • By Cessna 140 Pilot from Bluffton OH USA on Wednesday, April 27, 2022
  • Pros: It works as well as my iPad Mini 4 cradle. I like that they replaced my first cradle free of charge when it broke after 6 or 7 years.
  • Review: I attach the iPad Mini 6 to this cradle and hang it on my panel when I fly. This replaces the old Mini 4 cradle I was using before my iPad upgrade. My RAM EZ-Roll's Cradle is attached to a bent aluminum bracket I made. This cradle fills the bill.

  • Verified Purchase

Very tight fit

  • By on Thursday, April 21, 2022
  • Pros: Fits perfectly and holds the iPad solidly, can install the iPad with one hand
  • Review: The mount fits the iPad mini 6 perfectly which is both a strength and a weakness. The iPad is rock solid in the mount and the top roller makes it fairly easy to snap into the mount. The downside is that it is the roller that holds the iPad in place and if you have a glass screen protector the roller presses down on the edge of the screen protector and my concern is that over time the screen protector edge will crack or break. It also will only work with the bare iPad and no case so if you want a case, you need one that is easy to remove. I bought a case that magnetically attaches to the iPad and is easy to remove and store in the plane so it works out OK for me.

  • Verified Purchase

Fantastic as always!

  • By A Customer on Saturday, April 16, 2022
  • Pros: Holds the iPad rock solid. Many different mounting methods. Low priced.
  • Review: The EZ Roller mounts are perfect to hold my Mini 6 in the Jeep and SxS, allowing me easy access to my off-road mapping software. I picked up the Mini 6 to replace my Mini 5 on release day and then sadly had to try several other inferior products while I waited for the latest EZ Roller to hit the market. The Mini 6 has taken many falls from the lessors products during hard rock crawling and speeding through the desert, but it rock solid in an EZ Roller.

  • Verified Purchase

Easy to get iPad in and out

  • By A Customer from Lyons GA USA on Tuesday, May 24, 2022
  • Pros: Sturdy. Fits perfectly but iPad can not have a case on it.
  • Cons: Apple pen is held in a cradle on the side and can’t magnetically attach to iPad or charge.
  • Review:
  • Was this review helpful to you? Yes No 1 Other people found this review helpful.
  • Verified Purchase

It Fills the Bill

  • By Cessna 140 Pilot from Bluffton OH USA on Wednesday, April 27, 2022
  • Pros: It works as well as my iPad Mini 4 cradle. I like that they replaced my first cradle free of charge when it broke after 6 or 7 years.
  • Cons: I have no cons for this cradle.
  • Review: I attach the iPad Mini 6 to this cradle and hang it on my panel when I fly. This replaces the old Mini 4 cradle I was using before my iPad upgrade. My RAM EZ-Roll's Cradle is attached to a bent aluminum bracket I made. This cradle fills the bill.
  • Was this review helpful to you? Yes No 0 Other people found this review helpful.
  • Verified Purchase

Very tight fit

  • By on Thursday, April 21, 2022
  • Pros: Fits perfectly and holds the iPad solidly, can install the iPad with one hand
  • Cons: Roller latch may be an issue over time if you have a glass screen protector.
  • Review: The mount fits the iPad mini 6 perfectly which is both a strength and a weakness. The iPad is rock solid in the mount and the top roller makes it fairly easy to snap into the mount. The downside is that it is the roller that holds the iPad in place and if you have a glass screen protector the roller presses down on the edge of the screen protector and my concern is that over time the screen protector edge will crack or break. It also will only work with the bare iPad and no case so if you want a case, you need one that is easy to remove. I bought a case that magnetically attaches to the iPad and is easy to remove and store in the plane so it works out OK for me.
  • Was this review helpful to you? Yes No 2 Other people found this review helpful.

Fantastic as always!

  • By A Customer on Saturday, April 16, 2022
  • Pros: Holds the iPad rock solid. Many different mounting methods. Low priced.
  • Cons: Wasn't ready on release day.
  • Review: The EZ Roller mounts are perfect to hold my Mini 6 in the Jeep and SxS, allowing me easy access to my off-road mapping software. I picked up the Mini 6 to replace my Mini 5 on release day and then sadly had to try several other inferior products while I waited for the latest EZ Roller to hit the market. The Mini 6 has taken many falls from the lessors products during hard rock crawling and speeding through the desert, but it rock solid in an EZ Roller.
  • Was this review helpful to you? Yes No 0 Other people found this review helpful.

2 QUESTIONS & ANSWERS

  • Previously Asked Questions

  • Thursday, April 14, 2022

    Q: Specifically, will this fit the iPad Mini Generation 6 ? Not a 5 or 7 but the Gen 6?

    A: Yes, that''s exactly what this product was designed for, the iPad mini 6 released in September 2021 (there is no 7th generation at this time).

  • Sunday, December 26, 2021

    Q: Would it hold the iPad with a case or only naked?

    A: This is for use with the iPad mini 6 WITHOUT a case.

Customers who bought this also considered:

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will match that price and beat it by 10% of the difference.

Buy with Confidence!

Purchase today and you can return it in the original condition through Wednesday, January 04, 2023 !  See our return policy.

Sign up for our newsletter and stay updated on special offers.