Free Shipping!

30-day Money Back Guarantee

uAvionix tailBeaconX Mode S ADS-B Out Transponder and LED Tail Light - TSO

uAvionix
    • Item #16718
    • PN: UAX-90059-03
  • Free Shipping!
  • Item #16718
Qty

The uAvionix tailBeaconX TSO puts a Mode S transponder, 1090 MHz Extended Squitter ADS-B Out and an SBAS/WAAS GPS inside an LED rear position light. It mounts in place of your existing tail light, with the transponder and GPS antennas built in, so there is no panel-mounted transponder box, no belly antenna and no separate GPS to install.

Because it transmits on 1090 MHz, tailBeaconX meets ADS-B Out requirements in all U.S. airspace and is designed for ADS-B and Mode S transponder requirements worldwide. It is FAA STC approved (SA04568CH) for installation in certified aircraft on its Approved Model List, with STC validations from EASA, Transport Canada, the UK CAA and Brazil.

A control head is required. tailBeaconX is a remote transponder, so it needs a panel control head for squawk code, mode, IDENT, and pressure altitude. It connects by RS-232 serial and is compatible with the uAvionix AV-30-C for certified aircraft, and with the AV-30-E and AV-20-E for experimental aircraft. uAvionix also lists the GRT Mini-B, Mini-AP, Mini-X, Sport EX and Horizon EX and the MGL iEFIS and Xtreme EFIS as compatible. Use of some control heads may be limited to non-certified aircraft.

Save when you buy tailBeaconX with a control head: the tailBeaconX TSO + AV-30-C Bundle, tailBeaconX TSO + AV-30-E Bundle, or tailBeaconX TSO + AV-20-E Bundle.

uAvionix tailBeaconX ADS-B Out Transponder features:

  • Mode S transponder: TSO-C112e Level 2els, Class 1, with 250 W nominal (54 dBm) transmit power.
  • 1090 MHz ADS-B Out: TSO-C166b Class B1S Extended Squitter transmitter that meets the U.S. ADS-B Out rule (14 CFR 91.227), including Class A airspace above FL180.
  • Built-in SBAS/WAAS GPS: 15-channel GPS position source with 6 m RMS horizontal accuracy and 5 Hz updates. No separate GPS receiver or GPS antenna to install.
  • Space-based ADS-B ready: Demonstrated compatible with the Aireon space-based ADS-B surveillance network used by air navigation providers around the world (an Aireon performance designation, not part of the FAA TSO).
  • LED rear position light: Aviation white, 20 candelas, TSO-C30c Type III, with an LED rated for 20,000 hours.
  • No antennas to install: The transponder and GPS antennas are built into the light, so there are no coax runs or belly antennas.
  • Wi-Fi setup: Configure the installation on the ground with the free uAvionix skyBeacon Installer app for iOS and Android. Wi-Fi turns off automatically when the transponder is in ALT or ON.
  • Adjustable call sign: Change the transmitted call sign for flight plans, medical, charity, or commercial flights from the app or a compatible control head.
  • Suppression input: Connects to the suppression output of other L-band equipment such as DME.

tailBeaconX TSO specifications:

  • Width: 1.71" (43.43 mm)
  • Height: 4.35" (110.38 mm)
  • Depth: 4.36" (110.75 mm), with the universal installation kit and spacer
  • Weight: 3.24 oz (92 grams)
  • Input voltage: 9 to 30.3 VDC
  • Current at 14 V: 0.25 A typical, 0.5 A maximum
  • Current at 28 V: 0.125 A typical, 0.25 A maximum
  • Operating temperature: -45 to +70 C
  • Maximum altitude: 35,000 ft
  • Control interface: RS-232, 2400 bps, UCP, UCP-HD and Apollo protocols

What's included:

  • tailBeaconX TSO
  • tailBeaconX installation kit
  • Wi-Fi password card
  • Certificate of Conformance

Before you buy:

  • tailBeaconX replaces your existing transponder; it isn't meant to be paired with a separate Mode C transponder.
  • In certified aircraft, the AV-30-C is the approved control head.
  • Installation in a certified aircraft must be done by an appropriately rated technician under the STC. Confirm your aircraft is on the Approved Model List.
  • It needs a clear view of the sky, so it may not suit aircraft where the elevator or other structure blocks it.
  • If mounted on the rudder, control surface balance must be checked.
  • It does not replace a rotating anti-collision beacon.
  • Not for SatCom-equipped aircraft.

Documents (PDF):

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will Match that price and beat it by 10% of the difference. See Details.

Buy with Confidence!

Purchase today and you can return it in the original condition through Sunday, December 20, 2026!   See our return policy.

uAvionix tailBeaconX Mode S ADS-B Out Transponder and LED Tail Light - TSO

  • Free Shipping!
  • Item #16718
  • PN: UAX-90059-03
Qty

uAvionix tailBeaconX Mode S ADS-B Out Transponder and LED Tail Light - TSO Overview:

The uAvionix tailBeaconX TSO puts a Mode S transponder, 1090 MHz Extended Squitter ADS-B Out and an SBAS/WAAS GPS inside an LED rear position light. It mounts in place of your existing tail light, with the transponder and GPS antennas built in, so there is no panel-mounted transponder box, no belly antenna and no separate GPS to install.

Because it transmits on 1090 MHz, tailBeaconX meets ADS-B Out requirements in all U.S. airspace and is designed for ADS-B and Mode S transponder requirements worldwide. It is FAA STC approved (SA04568CH) for installation in certified aircraft on its Approved Model List, with STC validations from EASA, Transport Canada, the UK CAA and Brazil.

A control head is required. tailBeaconX is a remote transponder, so it needs a panel control head for squawk code, mode, IDENT, and pressure altitude. It connects by RS-232 serial and is compatible with the uAvionix AV-30-C for certified aircraft, and with the AV-30-E and AV-20-E for experimental aircraft. uAvionix also lists the GRT Mini-B, Mini-AP, Mini-X, Sport EX and Horizon EX and the MGL iEFIS and Xtreme EFIS as compatible. Use of some control heads may be limited to non-certified aircraft.

Save when you buy tailBeaconX with a control head: the tailBeaconX TSO + AV-30-C Bundle, tailBeaconX TSO + AV-30-E Bundle, or tailBeaconX TSO + AV-20-E Bundle.

uAvionix tailBeaconX ADS-B Out Transponder features:

  • Mode S transponder: TSO-C112e Level 2els, Class 1, with 250 W nominal (54 dBm) transmit power.
  • 1090 MHz ADS-B Out: TSO-C166b Class B1S Extended Squitter transmitter that meets the U.S. ADS-B Out rule (14 CFR 91.227), including Class A airspace above FL180.
  • Built-in SBAS/WAAS GPS: 15-channel GPS position source with 6 m RMS horizontal accuracy and 5 Hz updates. No separate GPS receiver or GPS antenna to install.
  • Space-based ADS-B ready: Demonstrated compatible with the Aireon space-based ADS-B surveillance network used by air navigation providers around the world (an Aireon performance designation, not part of the FAA TSO).
  • LED rear position light: Aviation white, 20 candelas, TSO-C30c Type III, with an LED rated for 20,000 hours.
  • No antennas to install: The transponder and GPS antennas are built into the light, so there are no coax runs or belly antennas.
  • Wi-Fi setup: Configure the installation on the ground with the free uAvionix skyBeacon Installer app for iOS and Android. Wi-Fi turns off automatically when the transponder is in ALT or ON.
  • Adjustable call sign: Change the transmitted call sign for flight plans, medical, charity, or commercial flights from the app or a compatible control head.
  • Suppression input: Connects to the suppression output of other L-band equipment such as DME.

tailBeaconX TSO specifications:

  • Width: 1.71" (43.43 mm)
  • Height: 4.35" (110.38 mm)
  • Depth: 4.36" (110.75 mm), with the universal installation kit and spacer
  • Weight: 3.24 oz (92 grams)
  • Input voltage: 9 to 30.3 VDC
  • Current at 14 V: 0.25 A typical, 0.5 A maximum
  • Current at 28 V: 0.125 A typical, 0.25 A maximum
  • Operating temperature: -45 to +70 C
  • Maximum altitude: 35,000 ft
  • Control interface: RS-232, 2400 bps, UCP, UCP-HD and Apollo protocols

What's included:

  • tailBeaconX TSO
  • tailBeaconX installation kit
  • Wi-Fi password card
  • Certificate of Conformance

Before you buy:

  • tailBeaconX replaces your existing transponder; it isn't meant to be paired with a separate Mode C transponder.
  • In certified aircraft, the AV-30-C is the approved control head.
  • Installation in a certified aircraft must be done by an appropriately rated technician under the STC. Confirm your aircraft is on the Approved Model List.
  • It needs a clear view of the sky, so it may not suit aircraft where the elevator or other structure blocks it.
  • If mounted on the rudder, control surface balance must be checked.
  • It does not replace a rotating anti-collision beacon.
  • Not for SatCom-equipped aircraft.

Documents (PDF):

 

0 CUSTOMER REVIEWS

0 QUESTIONS & ANSWERS

RELATED PRODUCTS

uAvionix tailBeaconX TSO + AV-30-C Bundle - Certified

tailBeaconX TSO Mode S ADS-B Out transponder bundled with the AV-30-C as its control head. Money-saving bundle.

Add to Cart
uAvionix tailBeaconX TSO + AV-30-E Bundle - Experimental

tailBeaconX TSO Mode S ADS-B Out transponder bundled with the AV-30-E as its control head. For experimental aircraft. Money-saving bundle.

Add to Cart
uAvionix tailBeaconX TSO + AV-20-E Bundle - Experimental

tailBeaconX TSO Mode S ADS-B Out transponder bundled with the AV-20-E as its control head. For experimental aircraft. Money-saving bundle.

Add to Cart
uAvionix AV-20-E Multi-Function Display - Experimental

2-inch multi-function display with AoA, G-meter, attitude, clock and timers that also controls tailBeaconX and echoESX. Experimental only.

Add to Cart
uAvionix AV-30C Primary Flight Display - Certified

Upgrade your legacy vacuum driven instruments to digital precision attitude and directional gyro customizable displays.

Add to Cart
uAvionix AV-30E Primary Flight Display - Experimental

Upgrade your legacy vacuum driven instruments to digital precision attitude and directional gyro customizable displays.

Add to Cart

Lowest Price Guaranteed!

If you find a better price elsewhere on this product we will match that price and beat it by 10% of the difference.

Buy with Confidence!

Purchase today and you can return it in the original condition through Sunday, December 20, 2026 !   See our return policy.

Sign up for our newsletter and stay updated on special offers.