Customer Service Your Account |   Help Center |  Phone: 1-877-314-7575 

  Your Shopping Cart  
Items:  0 Total:  $0.00  
Shipping:  0.00  
Shopping Cart

Yes, Standard Shipping will be Delivered By December 23rd
See Our Holiday Shipping Schedule for Details (Details)

 

 More products from RAM Mounts

     
RAM Beechcraft Yoke Mount Clamp for 1
List Price: $19.49
Now:  $17.49

Product # 8964

Add RAM Beechcraft Yoke Mount Clamp for 1


Email to a Friend


 Questions?

 
Write a Review

 

 

 

 

 

 

RAM Beechcraft Yoke Mount Clamp for 1" to 2" Rails


- 6 customer reviews.

RAM Beechcraft Yoke Mount Clamp for 1

This RAM Beechcraft Yoke Mount Clamp consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. This mount accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount it, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. This is an alternative mounting base for Beechcraft airplanes with a “throw over yoke”.

Material: Powder Coated Marine Grade Aluminum

Ball Size: 1" Rubber Ball "B" Size

Included in Kit:
(1) QTY 6" long metal strap
(1) QTY 8" long metal strap
(1) QTY 5.5" rubber strip that supports the metal straps to avoiding scratching or marking of the rail

Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry!

 

List Price: $19.49
Now: $17.49

Add RAM Beechcraft Yoke Mount Clamp for 1

Related Shopping Areas:
Aircraft / Cockpit AccessoriesRAM Mounting Solutions (GPS / iPad)

More Items Labeled:  Beechcraft - RAM_Mounts

Buy With Confidence!  Purchase today and you can return it in the original condition through Tuesday, January 16, 2018!  Our return policy.

Have a question about RAM Beechcraft Yoke Mount Clamp for 1" to 2" Rails?  Ask your question and see previous Q & A about this product.

 

Customer Reviews For RAM Beechcraft Yoke Mount Clamp for 1" to 2" Rails:
Write a review
Wednesday, November 16, 2016
Great Helicopter Skid Mount For Verb Camera
by A Customer from Tionesta PA USA 

Review: Easy to mount, works great. You might need longer clamp?
Was this Review Helpful to you?   Yes   No

Tuesday, September 20, 2016
Big round mount
by Simon from Tucson AZ USA 

Pros: Would likely work on a yoke that needed it.
Cons: The metal ring had to be stuffed into some piece of rubber and this job absolutely impossible
Review: I wasn't sure just how big the yoke would be on my Sierra before I went to pick it up so I had several mounts ready including this one. I thought it really strange that the internet, twitterverse and pilot supply houses just didn't know how big the yoke was. When I finally got to the airplane I found, much to my delight, that the RAM Small Claw worked just fine so I used it to mount my iPad Mini 4. Fifteen hours, four sorties over two days and I was home. There you go.
Was this Review Helpful to you?   Yes   No

Wednesday, September 23, 2015
Ram mounting clamp
by Robert from Del Mar CA USA 

Pros: clamp was correct size for the cross member
Cons: Problem with interference from other items welded to the cross member
Review: The RAM mount clamp was the only item missing in order to use the I-Pad mounting tray with ball clamp in my possession. It was attached to the cross member behind the front seat in a Stearman aircraft. The ball clamp and mounting tray attached to the mount clamp and allowed the I-Pad to swivel into view under the back instrument panel. This, in turn, was wired to ship's power. The mounting tray with i-pad can be pulled into view while in flight and tucked away for takeoff and landing.
Was this Review Helpful to you?   Yes   No

Thursday, April 16, 2015
by A Customer from Tampa FL USA 
Pros: Secure. Strong. Easy to Install
Cons: Post for ball mount too short. Needs to be about 1" taller.
Review: Worked well. Secure. Easy to install.
Except - The post on the ball mount is too short. I had to turn the mount for my iPad Mini upside down to get it to fit properly on the yoke and not block the panel instruments.
Was this Review Helpful to you?   Yes   No

Monday, July 21, 2014
Just what I needed
by Bob from Rome NY USA 

Pros: Ease and functionality
Cons: none
Review: I have a Beechcraft Sierra. Mounting this was simple and easy. I used an intermediate ram extension and a cradle for an ipad mini
Was this Review Helpful to you?   Yes   No

Friday, May 09, 2014
Cessna 172 Too!!
by Richard from DURAND MI USA 

Pros: No thumb screw to deal with
Cons: None
Review: I used this mount on my Cessna 172N, it mounts to the back of the yoke, not the shaft. Much cleaner installation that using the shaft mount. The tablet mount rests against the front of the yoke for a very stable install. Great!
Was this Review Helpful to you?   Yes   No


 

  

 

Previous Customer Questions For RAM Beechcraft Yoke Mount Clamp for 1" to 2" Rails:
Ask Your Own Question
On Sunday, June 01, 2014 a customer asked:
Q:
Will this yoke mount fit my Beechcraft Sierra C24R ? Thank you
A: This mount accommodates rails from 1.0" to a maximum of 2.1" in diameter.  We would suggest a thorough measurement of your yoke rail to ensure a correct fit.  If you need more room, we also carry the RAM Beechcraft Yoke Mount Clamp for 2" to 3" Rails.


 

 

Need Help?  Email us at service@MyPilotStore.com
Copyright 1998-2017 by MyPlane, Inc. All Rights Reserved. S2
Terms of Use.

More websites:  Aircraft for Sale -- FAA Written Exams

Sunday, December 17, 2017

Some keywords that may help you find this product: Buy RAM Beechcraft Yoke Mount Clamp for 1" to 2" Rails RAM Mounts RAM-B-108BU